| Manganese Greensand Filter System: Our Iron Filter systems use a high quality manganese greensand
plus media
that effectively remove iron, manganese and hydrogen sulfide (rotten egg
odor) usually found in well water. The system is installed in the main
water line. When the raw water enters your iron filter
it passes down
through the filter media and get oxygenated. The oxygen causes
precipitation of the minerals and any iron, manganese or hydrogen sulfide present
in your water supply is trapped resulting in a clean, filtered water flow to your household.
The filter media is periodically regenerated automatically,
backwashing the trapped minerals to the drain and regenerated by replacing
the oxygen. This is done by introducing potassium permanganate to the
media. Potassium Permanganate demand is drastically reduced with the use
of Manganese Greensand Plus instead of regular Manganese Greensand Media. The system comes with the Potassium Permanganate container. With
proper installation it removes the following contaminants
resulting in a healthier water.
- 15 ppm of both ferric (oxidized) and ferrous (clear) iron
- 05 ppm of Hydrogen sulfide (rotten egg odor)
- 10 ppm of manganese
More
about the Manganese
Greensand Plus Filter Media
Manganese
Greensand Filter Sizing Help
The Iron Filter Systems are equipped with
FleckŪ
5600 or Fleck 2510 Control Valve depending on the size of the mineral
tank for optimal performance. Note:
These systems are design for water
supplies with Ph between 6.2 and 6.8. If your water supplies have a pH of
6.1 or less, you need to neutralize Ph before passing through this
system. Neutralizer
Systems
|
