| 
        
          |   Shown with Optional 86 gallon Tank | This 5-Stage point of use Reverse
      Osmosis Water Filtration System has a throughput of 150, 250 or 350
      gallons per day plus 14 gallons tank for large requirements of commercial
      restaurant drinking water supply or ice maker. The system can also be used
      to provide boiled feed water. Specifically design for restaurant
      drinking water supply, the Vertex Pure Water Machine Commercial Reverse
      Osmosis system has capacity for up to 4 reverse osmosis membrane of 75 GPD
      each. This feature give you the flexibility to choose the model that best
      fit your water demand using the same quality robust construction design
      for high throughout units. 
           |  
          | The Vertex Pure Water Machine Commercial unit is a Five-Stage Reverse
      Osmosis Filtration System that contains the following filtration stages: 
        First Stage: 5 micron Polyspun Sediment Pre-filter for the removal
          of suspended solids and other contaminants.Second Stage: 10 Micron Carbon Block Cartridge for the removal of
          chlorine, taste and odor. Third Stage: 10 Micron Carbon Block Cartridge for additional removal
          of chlorine, taste and odor. Fourth Stage: Up to 400 GPD Hi-Flux Reverse Osmosis Membranes TFC.Fifth Stage: In-Line Post filter, Granular Activated Charcoal for
          ultimate taste and odor control. Additional Features 
        The system comes equipped with booster pump to ensure proper
          operating pressure and tank full pressure switch. Auto Shut-off Valve - Feed Water ControlFlow restrictor - modified capillaryLong reach, Non-airgap FaucetFeed water connector - Threaded Inlet Adapter with Metal Ball valveDrain Clamp3/8 Inch Flexible Polyethylene Tubing with Plastic Compression
          Fittings System Specifications 
        Booster pump: Flow through 36 volt DC pump with either 115 VAC/36
          VDC 60 Hz or 230 VAC/36 VDC 50 Hz transformer14 gallons holding tank, Pre-pressurized Butyl bladder. 9.8 Gallon
          Water volume when tank full at 40 psi. Optional 86 gallons tank also
          available.Optional Auto-flush system with solenoid control valve to flush
          brine side of membrane with full line pressure. Runs for approximately
          30 seconds each time system starts.System Dimensions 13.5" L x 7" W x 27.7" HTank Dimensions: 15.75" diameter x 22.5 H Condition of Use 
        Water Must be microbiologically safeTemperature, 40 - 100 degrees FPh Range, 3 to 11Feed pressure, 20 to 100 psiMaximum TDS, 1500 PPMTurbidity, less than 1.0 NTU |  
          |  |  Available Models 
        
          | Model | MFGR RO Rating | AutoFlush
            System | Price |  
          | PWM-R150 | 150 GPD TFC | No | $ 685.00 |  
          | PWM-R150/AF | 150 GPD TFC | Yes | $ 720.00 |  
          | PWM-R250 | 250 GPD TFC | No | $ 800.00 |  
          | PWM-R250/AF | 250 GPD TFC | Yes | $ 845.00 |  
          | PWM-R350 | 350 GPD TFC | No | $ 910.00 |  
          | PWM-R350/AF | 350 GPD TFC | Yes | $ 955.00 |  
          |  |  |  |  |  
        
          | Shipping Charges
            within US Continental: $ 59.00 |                                                  
       |